Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H290: May be corrosive to metals. H315: Causes skin irritation. H319: Causes serious eye irritation.
Precautionary Statement(s)	P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word	Warning
Storage class	8B Non-combustible, corrosive hazardous materials
WGK	NWG not water endangering
Disposal	28 Aqueous solutions: Container D.

Safety Information
Hazard Symbols	Irritant
Categories of danger	irritant
R Phrase	R 36/38 Irritating to eyes and skin.

Storage and Shipping Information
Storage	Store at +15°C to +25°C.

Transport Information
Declaration (railroad and road) ADR, RID	UN 1824 , 8, III
Declaration (transport by air) IATA-DGR	UN 1824 , 8, III
Declaration (transport by sea) IMDG-Code	UN 1824 , 8, III, Segregation Group: 18 (Alkalis)

Specifications
Amount-of-substance concentration	0.2500 mol/l
The concentration of this volumetric solution was determined with hydrochloric acid standard solution (article number 1.09060) standardized against volumetric standard Tris(hydroxymethyl)aminomethane (article number 1.02408). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.003 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 723e (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard Tris(hydroxmethyl)aminomethane, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025.

Specifications

Amount-of-substance concentration

0.2500 mol/l

The concentration of this volumetric solution was determined with hydrochloric acid standard solution (article number 1.09060) standardized against volumetric standard Tris(hydroxymethyl)aminomethane (article number 1.02408). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.003 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 723e (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard Tris(hydroxmethyl)aminomethane, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025.

Taksit Seçenekleri

Önerileriniz

Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.

Ürün resmi kalitesiz, bozuk veya görüntülenemiyor.

Ürün açıklamasında eksik bilgiler bulunuyor.

Ürün bilgilerinde hatalar bulunuyor.

Ürün fiyatı diğer sitelerden daha pahalı.

Bu ürüne benzer farklı alternatifler olmalı.

MERCK 109139 Sodium hydroxide solution c(NaOH) = 0.25 mol/l (0.25 N) Titripur

Tavsiye Et