Anasayfa
Kimyasallar
MERCK 100546 meta-Phosphoric acid pieces for analysis (stabilized with sodium metaphosphate) EMSURE

MERCK 100546 meta-Phosphoric acid pieces for analysis (stabilized with sodium metaphosphate) EMSURE

0 - Yorum Yap

Stok Kodu

100546.0500

Kategori

Kimyasallar

Marka

Merck Millipore

Havale

8.392,13 TL (%5,00 havale indirimi)

* 942,72 TL den başlayan taksitlerle!!

8.833,82 TL KDV DAHİL

Sepete Ekle

Hızlı Satın Al

Fiyatı Düşünce Haber Ver

Description
Catalogue Number	100546
Synonyms	Metaphosphoric acid, m-Phosphoric acid

Product Information
HS Code	2809 20 00

Physicochemical Information
Boiling point	600 °C (1013 hPa)
Density	2.0 g/cm3 (20 °C)
Melting Point	200 - 250 °C
pH value	2 (33 g/l, H₂O, 20 °C)
Vapor pressure	<0.001 hPa (20 °C)
Bulk density	1000 kg/m3

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H314: Causes severe skin burns and eye damage.
Precautionary Statement(s)	P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Signal Word	Danger
Storage class	8B Non-combustible, corrosive hazardous materials
WGK	WGK 1 slightly water endangering
Disposal	12 Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Hazard Symbols	Corrosive
Categories of danger	corrosive
R Phrase	R 34 Causes burns.
S Phrase	S 26-36/37/39-45 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Storage and Shipping Information
Storage	Store below +30°C.

Transport Information
Declaration (railroad and road) ADR, RID	UN 3453 , 8, III
Declaration (transport by air) IATA-DGR	UN 3453 , 8, III
Declaration (transport by sea) IMDG-Code	UN 3453 , 8, III, Segregation Group: 1 (Acids)

Specifications
Assay (acidimetric, HPO₃)	40 - 50 %
Assay (acidimetric, NaPO₃)	50 - 60 %
Identity	passes test
Chloride (Cl)	≤ 10 ppm
Nitrate (NO₃)	≤ 5 ppm
Reducing matter (as H₃PO₃)	≤ 100 ppm
As (Arsenic)	≤ 1 ppm
Cd (Cadmium)	≤ 10 ppm
Co (Cobalt)	≤ 5 ppm
Cu (Copper)	≤ 10 ppm
Fe (Iron)	≤ 50 ppm
Mn (Manganese)	≤ 5 ppm
Ni (Nickel)	≤ 10 ppm
Pb (Lead)	≤ 10 ppm
Zn (Zinc)	≤ 10 ppm

Taksit Seçenekleri

Önerileriniz

Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.

Ürün resmi kalitesiz, bozuk veya görüntülenemiyor.

Ürün açıklamasında eksik bilgiler bulunuyor.

Ürün bilgilerinde hatalar bulunuyor.

Ürün fiyatı diğer sitelerden daha pahalı.

Bu ürüne benzer farklı alternatifler olmalı.

MERCK 100546 meta-Phosphoric acid pieces for analysis (stabilized with sodium metaphosphate) EMSURE

Tavsiye Et