Witeg Digital Burette Titrex 0-50ml Yazılım Dahil
WİTEG Digital Burette Titrex 0-50ml
Dijital büret TITREX "damla damla" hızlı ve hassas titrasyon için idealdir. Tek cihaz 99.99 mlitreye kadar tüm hacimleri simüle eder. Daha da ötesi, kimyasal kaybetmeden titrasyon mümkündür! Hassas bir titrasyon için gerekli olan havadan arındırmadan, titrasyonun sonunda büretin sökülmesine kadar – titrasyona gerek kalmayan kimyasal şişeye geri akar! TITREX'in doruluğu ve hassasiyeti en yüksek kalitededir. Hata sapması oranları ISO 8655-3'ün gerektirdiğinden daha iyidir. Hafıza fonksiyonu sayesinde 1000 değer kaydedilir. Bu veriler daha sonra beraberinde gelen yazılım yardımıyla bilgisayara aktarılabilir.
Tek bakışta öne çıkan özellikler:
- • yüksek kalitede hassas cihaz, Almanya'da üretilmiştir.
- • en yüksek seviyede doğruluk ve hassasiyet , hata aralıklarımız DIN EN ISO 8655-3 zorunluluklardan daha iyidir
- • çoğu alkali ve asite dirençli
- • %0 kimyasal kaybı veren münhasır alet- hava ile boşaltma ve kapalı devrede drenaj
- • 360° döndürülebilir vana bloğu güvenliğinize katkı sağlar
- • ikisi birarada: dozaj ve titrasyon
- • dispenser olarak kullanıldığında 50 ml ye kadar, büret olarak kullanıldığında 99,99 ml ye kadar tüm hacimleri kapsar
- • kolay ve hassas hacim ayarlaması
- • dikey vanalar: tortulaşma yapmaz, bulaşmaya sebebiyet vermez
- • Tübü 180° çevirerek %100 damlamasızlık sağlanır
- • otomatik değer kaydı ve değerlerin bilgisayara RS232 (opsiyonel USB adaptör mevcuttur) arayüz yoluyla transferi imkanı sayesinde kopyalama hataları oluşmaz.
- • kalibrasyon: 20°C de su ile standart
- • yazılım bir sonraki kalibrasyon tarihini hafızaya kaydeder
- recalibration for liquids of different viscosities possible e.g. determination of acid content in milk
- easy to dismantle and to clean, valve block autoclavable at 121°C
- automatic power-cut-off after three minutes
- including NiMH 1,2V 2100mAh battery
- individual certificate, CE label and serial number
- DE-M marked according to the German calibration law
TITREX, suction tube, discharge tube, instruction manual, individual certificate, serial number, battery charger with EU and US adapter, software TITREXSOFT, RS232 interface cord, thread adapter A25, A28, GL32/45, S40
TITREX, suction tube, discharge tube, instruction manual, individual certificate, serial number, battery charger with EU and US adapter, software TITREXSOFT, RS232 interface cord, thread adapter A25, A28, GL32/45, S40
Özellikler
Quick and precise volume settingThe dispensing and titration volume can be set by turning the handwheels. The mode can be changed by pressing „DOS" respectively „TIT". The display shows the emitted volume („TIT" mode) respectively the filled volume („DOS" mode).
Perfect air-purging mechanism for 0% reagent lossTurn the discharge tube at 90°. Remove (purge) trapped air without reagent loss by pumping in a closed circuit. The reagent flows back into the bottle! After pumping 2 - 3 times the dispenser is free of air and ready to use. This special feature helps not only to save residual reagent but also when accidentally setting the wrong volume!
360°-turn for your added safetyNo matter how much you tighten TITREX, you can always redirect the discharge tube by simply turning the valve block to the desired position. This way the label of the bottle is always visible. This feature works for all our adapters. Adapters for different bottle threads can remain on the bottle.
100% drip-free system for your safetyBy turning the discharge tube at 180° all liquid flows back into the bottle. TITREX is completely closed and no accidental discharge can occur by inadvertently moving the piston. There is absolutely no dripping possible!
"Do-it-yourself” recalibration for a long life timeIf you use TITREX as a measuring device in conformity to ISO 9001 and GLP, you need to control and monitor its accuracy and reliability. Therefore you can easily recalibrate the value by pressing „CAL" until the display shows „CAL". With the buttons „+" and „-" you can now adjust and correct the value. TITREX can also be adjusted to liquids with other density and viscosity. TITREX can also be recalibrated with the included TITREXSOFT.
"TITREXSOFT (Included in scope of supply)Through the access to the TITREX’ memory, all data can be transferred to a PC – no more transmission errors! The completely new developed software helps to process the stored data. Saved values can be read-out in real-time during the titration process or afterwards. Via the protocol export function, the data together with the automatically created graph can be either printed or saved.
The components having direct contact with the reagent are made of chemical resistant materials: platinum spring, ceramic valve balls, PTFE piston, borosilicate glass 3.3 cylinder, borosilicate glass 3.3 valve
Quick and precise volume settingThe dispensing and titration volume can be set by turning the handwheels. The mode can be changed by pressing „DOS" respectively „TIT". The display shows the emitted volume („TIT" mode) respectively the filled volume („DOS" mode).
Perfect air-purging mechanism for 0% reagent lossTurn the discharge tube at 90°. Remove (purge) trapped air without reagent loss by pumping in a closed circuit. The reagent flows back into the bottle! After pumping 2 - 3 times the dispenser is free of air and ready to use. This special feature helps not only to save residual reagent but also when accidentally setting the wrong volume!
360°-turn for your added safetyNo matter how much you tighten TITREX, you can always redirect the discharge tube by simply turning the valve block to the desired position. This way the label of the bottle is always visible. This feature works for all our adapters. Adapters for different bottle threads can remain on the bottle.
100% drip-free system for your safetyBy turning the discharge tube at 180° all liquid flows back into the bottle. TITREX is completely closed and no accidental discharge can occur by inadvertently moving the piston. There is absolutely no dripping possible!
"Do-it-yourself” recalibration for a long life timeIf you use TITREX as a measuring device in conformity to ISO 9001 and GLP, you need to control and monitor its accuracy and reliability. Therefore you can easily recalibrate the value by pressing „CAL" until the display shows „CAL". With the buttons „+" and „-" you can now adjust and correct the value. TITREX can also be adjusted to liquids with other density and viscosity. TITREX can also be recalibrated with the included TITREXSOFT.
"TITREXSOFT (Included in scope of supply)Through the access to the TITREX’ memory, all data can be transferred to a PC – no more transmission errors! The completely new developed software helps to process the stored data. Saved values can be read-out in real-time during the titration process or afterwards. Via the protocol export function, the data together with the automatically created graph can be either printed or saved.
The components having direct contact with the reagent are made of chemical resistant materials: platinum spring, ceramic valve balls, PTFE piston, borosilicate glass 3.3 cylinder, borosilicate glass 3.3 valve